Alfa Network AIP-610H Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 50

Alfa Network AIP-610H Скачать руководство пользователя страница 45

NAT function enabled or not.

CASE 2:

You are going to install this equipment for an inn establishment, which have 3 clients. Each

client wants to have their own speed rate.

With this scenario, you can control them via IP or MAC address. To do it so, enable you

desired option (IP/MAC control) and put your client's IP/MAC address. One entry for each
client. This way, you will limit desired speed for each individual client. Further more, you can
activate firewall option to block any other machine not listed.

To use IP/MAC control, you must disable interface traffic control.

=> HOW TO USE BANDWIDTH CONTROL WITH QoS GROUP OPTION

QoS groups are used to limit a group of users, and share the total rate. The idea here is

simple:

ٛ

- Any member of the group can reach the total rate of the group

ٛ

- The total sum of all member's traffic together, will not exceed the total rate of the

group

ٛ

- Any member of the group can have guaranteed bandwidth

-Equal bandwidth sharing

Ex:

Let's back to our example above. Inn establishment, which have 3 clients. All clients have

256 kbit speed contract. One of the clients has 2 machines, which he likes to use internet on
both. How to solve this case, if he has 256 kbit speed and two machines? Simple. Let's enable
QoS group option.

Go to traffic control and enable QoS group option. Create a group as follow:

Group ID:

1

LAN Out rate: 256 -> Total rate for downloa

d

WAN Out rate: 256 -> Total rate for uploa

d

Next thing to do is to put the two machines of that client inside the group (via IP or MAC

control), as follow:

«
...
43
44
45
46
47
...
»

Содержание AIP-610H



















































Отзывы:

Нет отзывов