Alfa Laval Tri-Clover 741 Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 34

Alfa Laval Tri-Clover 741 Series Скачать руководство пользователя страница 4

- 4 -

CONTENTS

Thank you for purchasing a Tri-Clover Product!

This manual contains disassembly and assembly instructions, maintenance procedures, and a
complete parts list for all 761, 741, 762, 771 Air Actuated Valves, designed and manufactured
by Alfa Laval, Inc., Kenosha, Wisconsin.

READ THIS MANUAL carefully to learn how to service these valves. Failure to do so could
result in personal injury or equipment damage.

SAFETY

IMPORTANT SAFETY INFORMATION ............................................................................................... 5

INTRODUCTION

ABOUT THIS MANUAL ........................................................................................................................ 6

MAINTENANCE

VALVE DISASSEMBLY ........................................................................................................................ 7

VALVE DISASSEMBLY ........................................................................................................................ 8

VALVE COMPONENT INSPECTION ................................................................................................... 9

VALVE ASSEMBLY ............................................................................................................................ 10

"TR" STEM/SEAT ASSEMBLY ........................................................................................................... 12

TYPE 10, 20, AND 30 ACTUATORS .................................................................................................. 13

TYPE 80 ACTUATOR ......................................................................................................................... 15

TYPE 15 AND 25 ACTUATOR ........................................................................................................... 17

PARTS LIST

761/741 SHUT OFF • DIVERT • REVERSE ACTING SHUT OFF .................................................... 20

771 THROTTLING .............................................................................................................................. 22

762 KETTLE • TANK OUTLET • TANGENTIAL ................................................................................. 24

761 Y-BODY ........................................................................................................................................ 26

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
2
3
4
5
6
...
»

Содержание Tri-Clover 741 Series



































Отзывы:

Нет отзывов