3 Introduction
SaniMidget/SaniMagnum/SaniMega SB
3.5
ATEX/IECEx marking
The Alfa Laval Toftejorg SaniMidget SB, SaniMagnum SB and SaniMega SB are certified as category I components. The ATEX
certification is carried out by the Notified Body SGS Fimko Oy, who has issued the certificate no. Baseefa10ATEX0187X.
The IECEx certification is carried out by the Certification Body SGS Baseefa Ltd., who has issued the certificate no. IECEx BAS
19.0107X.
Note
Explosion protection type is constructional safety “c”.
The marking on the ATEX/IECEx certified Alfa Laval Toftejorg SaniMidget SB, SaniMagnum SB and SaniMega SB is as follows
(for information on marking position see section 3.1 Introduction):
Serial number explanation
Machines supplied with or without standard
documentation:
yyyy-xxxxx: serial number
yyyy: year
xxxxx: 5 digit sequential number
”SaniMxxx SB” = SaniMidget SB, SaniMidget SB UltraPure,
SaniMagnum SB or SaniMega SB
Marking for machines supplied with Q-Doc + FAT-SAT documentation
NOTE
Only available for Alfa Laval Toftejorg SaniMidget SB UltraPure.
Serial number explanation
Machines supplied with Q-Doc + FAT-SAT
documentation
yyyy-F/S-xxx: serial number
yyyy: year
xxx: 3 digit sequential number
9
