Alfa Laval Toftejorg MultiJet 40 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 38

background image

Instruction Manual, Toftejorg MultiJet 40

Page 26

IM-TE91A170-EN041

Maintenance and Repair

(Continued)

Replacement of Main Collars

Although normally exposed to very limited wear, it is possible to replace Main collars (pos. 26.1 and
26.2) in Body. The procedure to do this is described below.

Main collar upper

1. Place Body (pos. 26) in a vice upright position. Do not clamp on machined faces. Insert tool (see

page 29) into Main collar upper (pos. 26.1). Unscrew Main collar.

2. Carefully clean thread and recess in Body. Do not damage special thread in Body. Recess must be

absolutely clean. Make sure that new Main collar is clean and free from impurities.

3. Remove O-ring (pos. 34) from old Upper main collar and place it in the new one. (Inspect O-ring, if

worn it should also be replaced).

4. Screw in new Main collar. Attention should be given to make sure that thread is in correct

engagement before screwing in Main collar.

5. Tighten Main collar fully home and tighten up.

6. Check that Main collar is fully home: install Stem, Ball retainer with balls and Gear wheel (see

page 18). Check that there is sufficient axial clearance to allow for free rotation of Stem.

Main collar lower

1. Place Body in a vice in upside down position. Do not clamp on machined faces. Insert tool (see

page 42) into Main collar lower (pos. 26.2). Unscrew Main collar.

Warning

:

Thread on Main collar lower is left-handed.

2. Carefully clean thread and recess in Body. Do not damage special thread in Body. Recess must be

absolutely clean.

3. Make sure that new Main collar is clean and free from impurities.

4. Inspect O-ring on stem (pos. 36), if worn it should be replaced.

5. Screw in new Main collar. Attention should be given to make sure that thread is in correct

engagement before screwing in Main collar.

6. Tighten Main collar fully home and tighten up.

7. Check that Main collar is fully home: install Stem, Ball retainer with balls and Gear wheel. Check

that there is sufficient axial clearance to allow for free rotation of Stem.

ï

Return to menu

«
...
24
25
26
27
28
...
»

Содержание Toftejorg MultiJet 40







































Отзывы:

Нет отзывов

Похожие инструкции для Toftejorg MultiJet 40

FT ANTIVANDAL 40m

Бренд: Allmatic Страницы: 8

Бренд: MAHLE Страницы: 36

Бренд: Strong Страницы: 28

Бренд: Summerset Страницы: 14

Бренд: Philips Страницы: 2

Бренд: UNITED OFFICE Страницы: 35

Бренд: MadgeTech Страницы: 2

Бренд: MadgeTech Страницы: 2

Бренд: RCI Страницы: 2

Бренд: Yamaha Страницы: 2

Vintage DX7 Special Edition ROM

Бренд: Yamaha Страницы: 16

Vintage DX7 Special Edition ROM

Бренд: Yamaha Страницы: 34

Vintage DX7 Special Edition ROM

Бренд: Yamaha Страницы: 85

Бренд: Zinco Страницы: 12

Бренд: Ganz Страницы: 2

Бренд: Desco Страницы: 5

Бренд: Daiwa Страницы: 2

TAP Tall Bonnie Glo

Бренд: Jen-Ken Kilns Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды