23
Effective 05/04/2012
Unique PMO Plus CP HT Valve Series
Series Sanitary Mixproof Valve Instruction Manual
Below is stated the meaning of the LEDs' indications for fault finding in connection with the operation of the
Think
Top
®
.
Red flashing:
Unit in set-up mode or internal software fault.
If internal software fault, re-program unit
.
Red steady:
Unit in set-up mode or internal hardware fault.
If internal hardware fault, check if magnet is in range and check correct
wiring.
1. Orange flashing:
Time for maintenance has run out.
The unit has been self-adjusted into a maintenance alert condition.
Valve maintenance is strongly recommended. After maintenance: Disa-
bling of maintenance function is required before setting new position,
however, it is strongly recommended to make a complete new set-up
after valve maintenance.
2. Orange steady,
yellow flashing
(A and/or B):
The unit has been self-adjusted into a maintenance alarm
condition and the feedback is lost (a minimum of seal left).
Valve maintenance is required. After maintenance: Disabling of the self-
adjustment function is required before setting new position, however,
it is strongly recommended to make a complete new set up after valve
maintenance.
Red
Orange
Yellow A
Yellow B
Fault Finding
Содержание ThinkTop Digital 9612578966
Страница 2: ......
