ALFA LAVAL UNIQUE SSV STANDARD VALVE INSTRUCTION MANUAL—REV 3/19
3 Installation
Study the instructions carefully.
The valve is supplied as separate parts to facilitate the welding.
The items refer to the parts list and service kits section.
Check the valve for smooth operation after welding.
3.4 Recycling information
•• U
Unnppaacckkiinngg
- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps
- Wood and cardboard boxes can be reused, recycled or used for energy recovery
- Plastics should be recycled or burnt at a licensed waste incineration plant
- Metal straps should be sent for material recycling
•• M
Maaiinntteennaannccee
- During maintenance oil and wear parts in the machine are replaced
- All metal parts should be sent for material recycling
- Worn out or defective electronic parts should be sent to a licensed handler for material recycling
- Oil and all non metal wearing parts must be taken care of in accordance with local regulations
•• S
Sccrraappppiinngg
- At end of use, the equipment must be recycled in accordance with the relevant, local regulations. Besides the equipment
itself, any hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt,
or in the absence of local regulations, please contact your local Alfa Laval sales company. If the actuator is marked with a
danger warning, do not attempt to cut the actuator open.
DO NOT DISASSEMBLE
kg
!
Do N
NO
OTT attempt to disassemble the actuator due to spring under load danger!
SPRING UNDER LOAD
Do not attempt to cut open
kg
!
If marked with this warning, do N
NO
OTT attempt to cut the actuator open, due to spring under load danger.
WARNING
SPRING UNDER LOAD
DO NOT ATTEMPT TO CUT ACTUATOR OPEN
REFER TO SERVICE BULLETIN
!
If marked with this warning, do N
NO
OTT attempt to cut the actuator open, due to spring under load danger.
15
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | 417.831.1411
