Alfa Laval Pharma-line S 1, Инструкция по эксплуатации

Страница: 10 / 18

2 Installation
2.7 Fitting and piping
Bypass valves
It may be desirable for the user to provide valves and bypasses in the piping system to enable inspection and repairs.
Test connections
It may be desirable for the user to install a thermometer well and pressure gauge connections close to the exchanger.
Vents and drains
It may be desirable for the user to install vent and/or drain valves close to the heat exchanger. The shell side is equipped
with the option to vent and drain.
Vent and drain valves should be provided so the unit can be purged to prevent air, vapour or gas binding.
Before use of the vent and/or drain connection, it is necessary to install/connect piping to threaded hole 1/8" BSP.
Drains may discharge into an open manifold.
Pulsation and vibration
Care should be taken to eliminate or minimise the transmission of fluid pulsations and mechanical vibrations into the heat
exchanger.
Safety relief devices
The user is responsible for installing the required safety devices.
10
www.sks-online.com
www.sks-webshop.com