Alfa Laval MMPX 303SGP-11 Скачать руководство пользователя страница 144

Страница: 144 / 181

[email protected]

[email protected]
Movil:959440045

144

Safety stop means:

The machine must be stopped in the quickest and
safest way due to vibrations or process reasons.

Comply to the following conditions:

•

The bowl must be kept filled.

•

Sludge ejection (sludge discharge) must not
be made.

•

The machine must not be restarted before the
reason for the safety stop has been
investigated and action has been taken.

In case of emergency condition in the plant, the
machine must be stopped in a way that is
described in EN 418.

8.3.3

Component description and
signal processing

Separator motor 701

The separator is equipped with a 3-phase DOL-
(direct-on-line) started motor. The separator can
also be started by a Y/D starter, but then the time
in Y-position must be maximized to 5 seconds.

Discharge signal processing

The control system shall contain a memory
function for registration of the number of initiated
discharges.

At indication of the absence of a discharge the
operator or the control system must initiate a new
discharge.

At indication of the absence of two consecutive
sludge discharges an alarm must be given and
action must be taken.

www.fdm.com.pe

Содержание MMPX 303SGP-11






















































































































































































Результаты поиска

Содержание MMPX 303SGP-11

Отзывы:

Бренды по названию

Популярные бренды

Alfa Laval MMPX 303SGP-11, Руководство пользователя

Результаты поиска

Содержание MMPX 303SGP-11

Отзывы:

Бренды по названию

Популярные бренды