Alfa Laval MMPX 303SGP-11 Скачать руководство пользователя страница 111

Страница: 111 / 181

[email protected]

[email protected]
Movil:959440045

111

6.3.1

Friction coupling

−

dismantling

Check that the belt tightener is in backward
position.

Remove the motor adapter screws.

Remove the water tank and the flat belt.

Note that the tank must be lowered past
spindle end (A) before it can be withdrawn
(B).

Remove the flat belt.

Remove the electric motor complete with the
friction coupling and motor adapter.

Weight of motor including adapter and friction
coupling is not more than 20 kg.

Remove snap ring (9), cover (8) and friction
elements (7).

If the friction elements are worn, fit new ones.
Replace all friction elements even if only
one is worn.

If the friction elements are only greasy:
Clean the friction elements and the inside of
belt pulley (5) with a degreasing agent.

708

www.fdm.com.pe

Содержание MMPX 303SGP-11






















































































































































































Результаты поиска

Содержание MMPX 303SGP-11

Отзывы:

Бренды по названию

Популярные бренды

Alfa Laval MMPX 303SGP-11, Руководство пользователя

Результаты поиска

Содержание MMPX 303SGP-11

Отзывы:

Бренды по названию

Популярные бренды