Read the instructions carefully.
The items refer to the drawings and the parts list on
pages 19-24.
0
1. Remove nuts (8) and yoke (5).
2. Remove pump casing (7) and 0-ring (10)
from back plate (9), (use a plastic hammer,
if necessary).
3. Turn impeller (6) counterclockwise and remove it
from pump shaft (42), (use a plastic hammer, if
necessary).
e
*
1.
Remove flushing tubes (45).
2.
Turn seal housing (35)
clockwise
and
remove it together with fastening ring (43).
3. Remove O-ring (41) from the fastening ring.
e
.;;39
*
,r39a
¥q43
1.
Remove screws (39).
2.
Remove fastening ring (43) and O-ring (40)
from seal housing (35).
3. The shaft seal is now accessible.
0
*
Remove stationary seal ring (33) and O-ring (32)
from seal housing (35).
Handle scrap correctly.
e
44
45
(1-7*)
*
Remove back plate (9) together with the complete
shaft seal and intermediate flange (44).
0
23
Remove stationary seal ring (23) and seal (25)
from back plate (9).
*
�
;--J9
V
""f
3
9a
*
35
32
r33
/ , 36b
29b
30
�37
/
�29,
�36a
Remove rotating seal rings (36), a-rings (29),
washers (30), spring (37) and spacer (31) from
seal housing (35).
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | 417.831.1411