Alfa Laval AlfaNova 14-76, AXP AN, Инструкция по эксплуатации

Страница: 15 / 26

Installation
Mounting
It is recommended to mount the plate heat exchanger on the
fl oor, on feet or on the wall.
Larger heat exchangers should be secured with support
mountings (ordered as accessory) intended for a speci
fi c heat
exchanger, or be secured with straps or by means of mounting
bolts.
Note!
Regardless of the mounting method minimize the
pipe loads at installation.
Maximum tightening torques for the mounting bolts according
to table below.
Bolt dimension Torque
Nm lbf*ft
M5 2.3 1.7
M6 3.8 2.8
M8 9.5 7.0
M8 (Extra small units) 8.0 5.9
M10 19.0 14.0
M12 33.0 24.3
UNC 1/4”
3.8 2.8
UNC 5/16” 8.6 6.4
UNC 3/8” 15.6 11.5
In a rigid pipe system, small heat exchangers can be
suspended directly in the pipework. To avoid vibrations, use
anti-vibration mounting according to picture below.
Document ID Language Edition
34566980-01 EN 2018-01
Instruction Manual -
Fusion-bonded plate heat exchangers
15
EN