3 Installation
Study the instructions carefully and pay special attention to the warnings!
Always check the Agitator before operation - see chapter 3.3 Pre-use check.
The Agitator is for permanent fastening.
Make sure that the motor correspond to the environment.
3.2
Installation
Always read the technical data thoroughly (see chapter 6.1 Technical data).
Only install this Agitator in mounting angle according to the name plate (see chapter 6.1 Technical data).
Always use lifting equipment when handling the Agitator (see Step 2).
Always have safety elements removed by authorized personnel.
Never cover or remove the nameplate.
Never connect to power supply during installation or service.
Always have the Agitator connected to power supply by authorized personnel.
NOTE
Alfa Laval highly recommend to install motor protection guard to protect the motor from overloading.
Never install a none Alfa Laval shroud on the Agitator as it can lead to overheat and a breakdown of the motor.
Welding flange:
CAUTION
Only authorized personnel to weld in flanges.
Alfa Laval cannot be held responsible for incorrect installation.
TD605-096
Step 1
Dismantle the welding flange if fitted onto the Agitator.
2
1
TD605-004
10
