Alfa Laval AFPX 617XGV-14/74CG, Инструкция по эксплуатации

Страница: 32 / 154

2.4 When changing oil 2 Maintenance Directions
32
2.4.2 Oil change procedure
1. Place a collecting tray under the drain hole,
remove the cover (1) and the drain plug (3)
and then drain off the oil.
2. Fill new oil in the worm gear housing. The oil
level should be slightly above middle of the
sight glass.
Oil volume: Approx. 13 litres.
Suitable oil brands can be found in ‘‘2.5.3
Recommended oil brands” on page 36 .
NOTE
Before adding or renewing lubricating oil in
the worm gear housing, the information
concerning different oil groups, handling of
oils, oil change intervals etc. given in chapter
‘‘2.5 Lubricants” on page 33
must be well
known.
CAUTION
Burn hazard
Lubricating oil and various machine surfaces
can be sufficiently hot to cause burns.
NOTE
During operation the oil level must be slightly
below the middle of the sight glass.
If the oil level is too high, the lifetime of the
rolling bearings will be reduced due to high
temperature.
G
082
83
1
1
1. Cover
2. Sight glass
3. Oil drain plug
G
0
48
42
4
1
Burn hazards: The drained oil may be hot
G
0
82
69
1
1
The oil level should be slightly above middle of the
sight glass