Alfa Laval 881176-09-01/1, Инструкция

Страница: 22 / 56

3.1 Operating routine 3 Operating instructions
22
3.1.5 Manual stop
1. Turn off the liquid feed.
2. Stop the separator.
When the separator has nearly stopped
rotating, the contents of the bowl (approx. 1
litre) will be drained out by gravity at the
bottom of the separator. This is the normal
draining of the bowl as it stops.
3. Make sure that the valves (if any) are closed
on both the feed and outlet sides of the
separator. If this is not done and the position
of the tank level is higher than the inlet/outlet
of the separator, there is a risk that coolant
may be siphoned through the separator.
NOTE
After each stop the separator bowl must be
well cleaned. Otherwise an unevenly spaced
sludge cake will at next start result in heavy
vibration and damage can be caused.