13/16
ALFA IN a.s. ©
www.alfain.eu
1. Insert the mains plug into a suitable 1x230 V ± 10% mains socket, 50/60
Hz. The supply fuses or circuit breaker should correspond to the technical
data stated in this manual.
2. Switch the main switch
A15
to the position “I“.
3. Connect the TIG torch to the quick connector (-)
A1
.
4. Connect the earthing cable to the quick connector (+)
A2
.
5. By means of the welding method switch
A7
switch to the position TIG
6. Connect the gas hose to the gas cylinder connector on the gas bottle.
7. By means of the encoder
A9
set the welding current.
Fig. 3. Getting started TIG
8. JOBS
JOBs are available in both methods – MMA and TIG.
The welding machine has a choice from 9 JOBs.
HOW TO SAVE PARAMETERS TO THE JOB
1. Parameters, which you want to save to the JOB, set by means of the
encoder
A9
. (By short pressing the encoder
A9
switch between particular
parameters of the curve or functions.)
2. As soon as you will have saved all parameters, then by long pressing the
encoder
A9
get into the JOBs menu. The display
A10
will show
-S-
. In the
JOBs menu are two positions:
-S-
(Save) and
-L-
(Load).
3. By short pressing the encoder
A9
confirm the message
-S-
on the display
A10
to save your choice of parameters or functions. The display
A10
will
show numbers from 2 to 10 for particular JOBs. Rotate the encoder
A9
to
select the desired JOB number, into which you want to save your selected
parameters, then confirm your choice by short pressing the encoder
A9
.
HOW TO LOAD THE SAVED JOB
1. By long pressing the encoder
A9
get into the JOBs menu. The display
A10
will show
-S-
.
2. Rotate the encoder
A9
to move to the position
-L-
. By short pressing the
encoder
A9
confirm the position
-L-
.
3. The display
A10
will show numbers from 2 to 10 for particular JOBs. Rotate
