Alfa IN PEGAS 250 MIG SYN, Инструкция по эксплуатации, Страница: 14 / 23

14/23
ALFA IN a.s. © www.alfain.eu
Picture 7 – Gas flow setting
F1 Gas bottle
F2 Cylinder Valve
F4 Pressure Reducer
F5 High Pressure Manometer
F6 Low Pressure Manometer
F7 Adjusting Screw
F9 Gas outlet
7. BASIC SETTINGS
SETTING THE METHOD OF WELDING
1. Long pressing the button A5 opens the menu.
2. By turning the button A5 choose the method ELE (covered electrode
MMA); MAN (MIG/MAG manual) or SYN (MIG/MAG synergistic). Confirm
your choice by pressing the button
A5 .
QUICK SETTING THE JOB - MEMORY
Works for three welding methods.
1. Long press one of the buttons A4 (1,2,3,4,5,6) to save set parameters to
memory.
2. Short press one of the buttons A4 (1,2,3,4,5,6) to load parameters from
memory.
WELDING MODE 2T – TWO STROKE
Works for both welding methods MIG/MAG.
Press the button A19 to switch between the modes 2T / 4T . The
two stroke mode is signalized by LED A17 .
1. Tact – press and hold the button the machine will start welding
2. Tact – release the torch button the machine will stop