Alfa IN AXE 250 IN MIG MAN, Инструкция по эксплуатации, Страница: 14 / 24

14/24
ALFA IN a.s. © www.alfain.eu
Speed of the wire
Material thickness
Sign of the secondary parameter
V11
Right display shows
Welding voltage
Welding current in the MMA mode
Choke
V12 Control light of Voltage or Voltage Correction
V13 Button for selecting the parameters to be displayed
V14 Control light of Wire Speed Correction
V15 Control light of Choke or Choke Correction
V16 Encoder Voltage or Correction
V17 Control light two stroke – 2T
V18 Control light four stroke – 4T
V19 Button for selecting the parameters to be displayed
SETTING THE METHOD OF WELDING
1. Long pressing the button V5 opens the menu.
2. By turning the button V5 choose the method ELE (covered electrode
MMA); MAN (MIG/MAG manual) or SYN (MIG/MAG synergistic). Confirm
your choice by pressing the button
V5 .
QUICK SETTING THE JOB - MEMORY
Works for three welding methods.
1. Long press (4s) one of the buttons V4 (1,2,3,4,5,6) to save set parameters
to memory.
2. Short press one of the buttons V4 (1,2,3,4,5,6) to load parameters from
memory.
WELDING MODE 2T – TWO STROKE
Works for both welding methods MIG/MAG.
Press the button V19 to switch between the modes 2T / 4T . The
two stroke mode is signalized by LED V17 .
1. Tact – press and hold the button the machine will start welding
2. Tact – release the torch button the machine will stop