Alfa IN ALF 181 BASIC aXe, Инструкция по эксплуатации

Страница: 17 / 23

- 17 -
ALFA IN a.s. © www.alfain.eu
WELDING MODES
Machines works in four modes:
1. Ccontinuous two stroke (2T)
2. Continuous four stroke (4T)
3. Spot welding
4. Interval welding
TWO STROKE
P2 P3
Both potentiometers P2, P3 are in the OFF position. Welding
procedure starts by pressing the button in the torch handle. It is necessary to
keep the button pressed all the time during welding. The welding stops by
releasing the torch button.
1
2
Welding proces
FOUR STROKE
P2 P3
The four stroke mode is being used mostly for long welds, when
there is no need to hold the torch button pressed. The left potentiometer P2 is
in the OFF position, the right potentiometer P3 is in the ON position. The
welding procedure start by pressing the torch button; after releasing the torch
button the welding continues. The welding stops after the second pressing and
releasing the torch button then.
1- 2
3 - 4
Welding proces