33
Fig. 7
Filling
Attention: Always remove the kettle
from the power supply base before
filling.
• Raise the lid and position the kettle
under the tap. Turn on the water
and fill the kettle with water to the
required level.
• Fill the kettle with the amount of
water you intend to use: this will
reduce boiling time.
Remember that shorter boiling
times reduce the formation of lime.
Always fill the kettle with at least
one cup of water to prevent the
kettle from running when dry; such
improper use may damage the kettle.
Warning: Never exceed the maximum
level indicated by the MAX symbol
inside the kettle (Fig. 8).
MAX
Fig. 8
ATTENTION!
If you fill the kettle beyond the
maximum level, you risk having
boiling water come out, with
consequent danger of scalding and
damage to the kettle.
• Close the kettle by completely lowe-
ring the lid until you hear a “click”
(fig. 9).
CLICK
Fig. 9
Switching on/off
• Press the ON/OFF lever
(fig. 10).
Fig. 10
The ON/OFF lever lights up
: the
water heating cycle begins.
• The kettle switches off automatically
a few seconds after the water
reaches the boiling point: the
switch lever ON/OFF automatically
returns to position OFF (fig. 11)
and the lamp switches off
.
MDL06 Bollitore_MicheleDeLucchi_14.indd 33
22/08/18 17:51