Setting Up - Chapter 1
QuadraVerb 2 Reference Manual
17
To adjust the Advance Footswitch’s set of Programs:
¿
Press [GLOBAL].
The [GLOBAL] LED will light.
¡
Press [PAGE >] once.
This selects page 2, and the display will read:
FOOTSWITCH: 00 Pset TO 00 Pset
¬
Turn the [VALUE/ENTER] knob to adjust the Program number to begin the range
(Preset 00 — 99, User 00 — 99).
÷
Press [PAGE >] once and use the [VALUE/ENTER] knob to adjust the Program
number to end the range (Preset 00 — 99, User 00 — 99).
Bypass
The Bypass footswitch jack lets you turn the Bypass function on and off from a
connected footswitch. When pressed, the [BYPASS] LED will light, indicating that
Bypass mode is enabled. When pressed again, the [BYPASS] LED will turn off.
For more information about Bypass mode, see chapters 2 and 5.
Tap Tempo
Either footswitch jack can be used to provide a tap tempo source for setting delay
time, provided the selected Program uses one of the two available tap tempo delay
types. This requires that you have defined an Effect Block as one of the two Tap
Tempo delay types, and that the desired footswitch jack has been selected for
controlling tap tempo. To select a footswitch jack for use with a Tap Tempo Delay:
¿
Press [GLOBAL].
The [GLOBAL] LED will light.
¡
Press [< PAGE] twice to select Global Page 8.
The display will read:
TAP TEMPO FOOTSWITCH: NONE
¬
Turn the [VALUE/ENTER] knob to select either the ADVANCE or BYPASS
footswitch jack, depending on which one you wish to use to control tap tempo.
