Alesis Micron, Руководство по обслуживанию

Страница: 23 / 41

Push sus pedal.
1) Verify that the first line of the LCD says “Push sus pedal”..
2) Verify that the sustain pedal is plugged into the
sustain jack, and push and
release the sustain pedal.
Push: MIDI loop.
1) Verify that the first line of the LCD says “Push: MIDI loop”.
2) Verify that the MIDI in jack is connected to the MIDI out jack with a MIDI
cable.
3) Push the encoder to test the connection.
Tests passed.
1) Verify that the first line of the LCD says “* Tests passed”.
END OF QC TEST PROCEDURES
Firmware Update
To update firmware, power on the system while holding down the [programs]
and [setups] buttons. Connect a PC to the MIDI in jack, and send a sysex file.