Applications
4
27
Using the iMultiMix16 USB with a
Computer
Your Alesis iMultiMix mixer comes with a Full Speed USB 1.1
port which you can connect to a computer. This USB connection
allows you to send CD-quality (stereo, 16-bit, 44.1 kHz) audio
between the computer and your iMultiMix mixer.
This feature allows you to use the iMultiMix USB as a highly
flexible external soundcard. Use the computer’s built in audio
recorder—or use dedicated Digital Audio Workstation software—
to record and play back CD-quality audio within your computer.
A 2-meter USB cable is included. If you need to connect the
iMultiMix USB across a longer distance, we recommend that you
purchase a longer USB cable, as using hubs and other extenders
with USB audio often causes glitches and other problems.
Sending and Receiving Audio Data
The USB port sends the iMultiMix USB’s MAIN OUT/TAPE
OUT left and right signals to the computer.
The USB port receives a stereo audio stream from the computer
and assigns it to the TAPE IN left and right channels of your
iMultiMix USB mixer. Note that, if a device is connected to the
iMultiMix USB’s TAPE IN inputs, the signal from this device is
merged with the signal from the computer.
Precautions when using the USB
connection
To ensure that the iMultiMix USB is recognized correctly by your
computer, always turn the iMultiMix USB on a few seconds before
inserting the USB cable into the computer. When powering up
both your computer and the iMultiMix USB, turn on the iMultiMix
USB first and the computer second. When powering down your
computer and the iMultiMix USB, turn off the computer first.
Wait to turn off the iMultiMix USB until the computer has shut
down.
Connection instructions for Windows (XP,
2000, ME, and 98 Second Edition)
Upon first sensing the iMultiMix USB’s USB input, Windows XP
and Windows 2000 automatically recognize the iMultiMix USB
and proceed to install “USB audio codec” drivers. Windows ME
and Windows 98 Second Edition may require you to insert your
Windows disc, after which the drivers should load correctly.
After the iMultiMix USB has been recognized and its drivers have
been installed, open the Control Panel. Select Sounds and Audio
Содержание iMultiMix 16 USB
