Alesis Fusion 6HD, Руководство по обслуживанию

Страница: 207 / 216

3) After the test is finished, verify that the onboard memory (“Base”) passed the test and the
expansion memory module, “Exp-Bank A” and “Exp-Bank B,” are listed as “Not Present”:
4) Turn the encoder one click clockwise. Note that the highlighted text now reads “Voice
Engine 2.”
Press the soft button that corresponds to the text “Engine” on the right hand side of the display
to clear the previous test results, and then “PLAY” to test Voice Engine 2 memory.
5) Again, after the test is finished, verify that the “Base” memory for Voice Engine 2 passed the
test, and “Exp-Bank A” and “Exp-Bank B” are not present.
6) Repeat steps 4 and 5 to test the Streaming Engine Memory. However, only verify that the
“Base” memory passes the test. There will be no “Exp-Bank A” or “Exp-Bank B.”
GPIO
1) Press the soft button that corresponds to the text “GPIO” on the right hand side of the
display. The LCD should display the following:
2) Press “PLAY” to run the test and verify that both the Main and Expansion PCB have no
failures: