Pager Function
25
To TURN ON the Pager, press and hold the “
Menu
” button for 3 seconds. The pager will beep and the screen
shows the pager status information before entering its standby mode.
If the Pulse Companion is turned on, you will now see the name allocated to it flash on the screen every 8 seconds
e.g. “
Pulse 01
” (This can be changed to the users name).
To TURN OFF the pager, press and hold the “
Menu
” button for 3 seconds to enter the “
Set-up & Edit
” menu. Use
the right key to scroll to the menu item “
Turn Off
” Select “
Turn Off
” with the up key and the pager will turn off.
To snooze any active alarm / fault tunes press the “
Up
” arrow, this will snooze any active alarm calls for 5 minutes.
See pager handbook for further details at;
www.alert-it.co.uk/support/
Figure 13
PLEASE NOTE::
While the pager is shipped with some charge in the batteries, it is recommended that the pager is charged fully before
use. For full details about this pager see “
UH1068B P137 User Handbook.pdf
”.
Sel
Alarm
Menu
