Alert-it Companion Mini, Быстрый старт

Страница: 8 / 16

Positioning and Setup
Press and release the test button on the monitor to enter the 60 second test
mode.
Temporarily place the monitor under the mattress without any fixings.
The monitor performs best if placed beneath the user. However, due to the
wide variety of bed types and mattresses, it is advisable to test the units
positioning before securing it into place.
Tap or press the bed to simulate seizure movements.
The pagers ‘monitor’ LED should now go steady and a short audible tone is
heard each time the Companion Mini detects movement.
If you are happy that the monitor is picking up each press/tap of the mattress
then you can secure it into positon using the supplied Velcro pads or cable ties
To use the tie wrap you must remove the base and thread the tie wrap through
the hole’s as shown in figure 3 and 4.
Figure 3. Figure 4.
If required, the base can be screwed to the bed through the holes in the base
(screws not provided).
If a suitable position (place to detect movements) cannot be found, the
sensitivity may need to be increased slightly by connecting the monitor (mini)
to a PC and making adjustments with the software provided on the USB stick.
Contact Alert-iT customer support for more information.
Page | 7