www.aleratec.com
22
Troubleshooting
4. “Source Selected..” Error
▪ The printer is still in “paper” printing mode instead of “disc”
printing mode. Push the Printer Mode Switch on the disc autoloader
to the “disc” position.
5. “Unload Disc Error”
▪ A completed disc has not been dispensed properly into the disc
collection bin. Clear the disc and click the “Continue” button.
6. “No Disc Loaded..” Error
▪ There are not enough blank discs in the disc autoloader to complete
the job. Load blank discs and click the “Continue” button.
This error can also happen when a completed disc has not been
dispensed properly. If this is the case, clear the disc(s) and click the
“Continue” button.
Disc Position
Paper Position
Printer Mode Switch