Aleratec RoboJet Disc Autoloader 360104, Руководство пользователя

Страница: 29 / 37

www.aleratec.com 23
Troubleshooting
7. Click the “Tray Out” button so that the tray is pulled into the
Autoloader
8. Reattach the Autoloader to the printer and slide the Printer Mode
Switch back to the “disc” position
9. The disc bin is getting too full for operation prior to 100 discs.
▪ Optical discs vary in thickness depending on the type,
manufacturing and coatings. Thicker discs will take up more space
in the disc bin and reduce the total capacity of the Autoloader. The
unit has been designed so that you can remove completed discs
while a job is in progress, allowing you to increase a job’s capacity.
10. Discs are frequently getting stuck when being loaded from the
dispenser or dropping into the disc bin.
▪ Some types of discs are also “stickier” than others, especially when
taken from a brand new spindle. It often helps to “fan” these discs
prior to loading them into the Autoloader (briefly separate each
individual disc from the one above and below it on the spindle).
c
S
c
S