PODD – Installation, Operation and Maintenance Manual
A l e n c o n S y s t e m s L L C - P a g e
|
37
10.10.1
Setting a Static IP Address
By default, the PODD will have a dynamically assigned IP address, which
corresponds to a value of “0.0.0.0” for the parameters “static_gateway”,
“static_ip_address”, “static_netmask”.
To set a static IP address:
1. Change parameters to the desired values
2. Click
<Restart HUB>
to reboot the PODD Site. Note: the new values should
be recorded in case of an error.
3. PODD Site should now be accessible at the new IP address.
10.11 Device Replacement
When a networked Alencon device is replaced the associated GUID to LIN and Modbus
Address mapping on the PODD Site must be updated. The mapping is stored in the
Metadata .csv file. Alencon personnel will provide you a new Metadata file
corresponding with the replaced device.
10.11.1
How to Update Metadata File
To update the metadata file:
1. Go to the Maintenance tab
2. Click
<Choose File>
and select the newest .csv metadata file
3. Click
<Upload Meta Data>
Figure 41: PODD Site, Maintenance Tab
