Alencon SPOT: Installation,
Operation, and Maintenance Manual
11 |
P a g e
5 Installation
The AID may be mounted on the side of the SPOT/BOSS or on a separate Unistrut hanging plate
and wired directly into SPOT inputs. Use the following steps to install an AID device.
Ensure the switch is in the OFF (OPEN) position before beginning the install process.
5.1 Mounting Procedure
–
Separate Mounting Bracket
1.
AID is shipped already mounted on the Alencon Bracket (see Figure 6).
2.
Lift the AID so that the mounting plate lines up with and hooks into the Unistrut (see
Figure 7).
3.
Once AID is secured in place you must fasten the other end of the mounting bracket to
the Strut Channel using 5/16” Hex Head Screws (
see Figure 7).
F
IGURE
6:
AID
M
OUNTING
B
RACKET
(I
NSTALLATION
H
OLES ARE
H
IGHLIGHTED
