SER 9911-1
High-Pressure Stripped Pump
Revision (4-02)
6
Alemite Corporation
Accessories
Preventive Maintenance
Refer to section entitled Overhaul for the procedures necessary to perform maintenance.
Performance Curves
A pump’s ability to deliver material is based on the pressure (psi/Bars) and quantity
(cfm/lpm) of air supplied to the motor and the amount of material discharge [back] pressure to
be overcome within the system.
This chart contains curves based on three different air pressures. The curves relate delivery
in pounds (kilograms) per minute (X axis) to air consumption in cubic feet (liters) per minute
(right Y axis) and to material discharge pressure in psi/Bars (left Y axis).
Part Number
Description
326750-F1
Bung Adapter, 2 " NPTF (m)
Table 3
High-Pressure Stripped Pump Accessory Component
Daily
Weekly
Monthly
Yearly
Wipe Exterior with Clean Cloth
Inspect for Air and/or Material Leakage
Table 4
High-Pressure Stripped Pump Preventive Maintenance Schedule
Figure 3
Delivery versus Discharge Pressure and Air Consumption