16
OPERATION / SAFETY INSTRUCTIONS:
-
Always check the selected range prior to connect the
testleads to the measuring-object.
-
If the measuring magnitude is unknown, select the
highest range.
-
Never select another range with the testleads connected
to the measuring-object, always remove the test leads
first from the circuit being measured.
-
Carefully inspect the test leads. If damaged, discard and
replace.
-
In order to prevent damage to the unit, never fail to keep
the maximum tolerable voltage and current, expecially for
the 10 A current range.
-
Be careful when measuring voltages over 48 Volt and
never use this tester in wet surroundings.
-
When not in use, switch the TM-16 to the OFF position.
This will save battery power.
-
If the display readout gets weak, replace the battery.
LVD:
The TM-16 complies with EN 61010-1 and EN 61010-2-31 as published in
the LVD directive 73/23/EEC and 93/68/EEC.
EMC:
The TM-16 complies with EN 55011-3.1991 and EN 50082-1.1992 as
published in the EMC directive 89/336/EEC
Содержание TM-16
Страница 1: ...1 GEBRUIKSAANWIJZING MODE D EMPLOI USER S MANUAL GEBRAUCHSANLEITUNG TM 16...
Страница 23: ...23...
