FUNCTIES
1. Heat-sink of the amplifier. Please keep unobstructed, may become hot.
2. MIC XLR input for microphone (symmetrical).
3. Volume control for MIC input.
4. 6.3mm jack MIC input for microphone (symmetrical).
5. Volume control for LINE IN input.
6. Stereo cinch connection input LINE IN (AUX). The amplifier converts the
stereo signal into mono.
7. Master volume control for adjusting the total volume.
8. LINE IN XLR input for line signals (symmetrical).
9. Treble control.
10. 6.3mm jack output (symmetrical). Signal for an external device.
11. Bass control.
12. Power LED. Power indication.
13. CLIP LED. Illuminates at maximum power output.
14. Power switch.
15. 230V mains power input.
WARNING / MAINTENANCE
GENERAL:
• Carefully read the user’s manual and follow all directions.
• Before cleaning the speaker, always remove the mains cable from the wall
socket and switch off the speaker.
• Clean the cabinet with a slightly moist cloth.
• Never place or use the set in wet or humid space or environment.
• Ensure adequate heat dissipation; never cover the set nor place it directly next
to a heat source.
• Prevent damaging the mains cable and ensure it doesn’t cause a risk of trip
-
ping or falling.
• Never disassemble the set; this may only be performed by qualified personnel.
• Only turn on the speaker after setting all volume controls to MINIMUM (0), to
avoid possible scares when switching on.
• Prolonged listening to high volume levels can cause hearing damage.
