Alecto DVM-76, Руководство пользователя

Страница: 11 / 20

11
While adjusting, the volume level will be indicated on the
display and the icon will appear in the upper part when
the volume level is set to 0 (no sound).
Talk back:
With the display switched on, press the TALK button to talk
back to your baby. Keep the button depressed for as long
as you are speaking and release the button to listen.
You can adjust the volume at the baby unit using the or
buttons.
Zoom function:
Press the button to turn on the zoom function (moving
the image somewhat closer) and press the button to
turn off the zoom function.
When the zoom function is switched on, the icon will
appear in the upper part of the display.
With the zoom function activated, press and hold the , ,
or button to move the image to the left, to the right, up
or down (attention: the camera doesn’t actually move, the
display merely shows another part of the available image).
Temperature display:
The upper right corner of the parent unit’s display shows
the temperature of the baby’s room.
This display has a range of 0°C to 50 °C.
Don’t forget that the temperature is only an
indication.
These alerts appear at temperatures below 14°C
/ above 30°C.
Multi-camera: (also see chapter 5)
If you’ve registered multiple cameras on the parent unit,
press the button to view the images of the next camera.
The upper part of the display shows which camera you’re
watching ( , , or )
If is shown in the upper part of the display, then the
images of all registered cameras are shown one after the
other for approx. 18 seconds.
The unit does NOT automatically switch to a camera
where sound is being detected.