Safety
11
NOTICE!
Risk of damage!
Improper handling of the laminator may damage the
laminator.
− Place the laminator on an easily accessible, level, dry,
heat-resistant and sufficiently stable work surface. Do not
place the laminator on the edge of the work surface.
− Avoid the build-up of heat by not placing the laminator
directly up against a wall or under cupboards or similar.
− Protect the laminator from direct sunlight.
− Never place the laminator on or near hot surfaces
(e.g. stovetops, heaters etc.).
− Ensure that the power cable does not come into contact
with hot parts.
− Never expose the laminator to high temperatures
(heaters etc.) or to the effects of the weather (rain etc.).
− Never laminate damp documents or organic objects
(e.g. flowers, leaves etc.).
− Do not cut the laminating pouches into pieces before
laminating and do not in any case cut off the sealed edges
from the laminating sheets.
− Stop using the laminator if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Only laminate at room temperature (approx. 50–77 °F /
10–25 °C).
− Never insert metallic objects (e. g. paper clips, staples etc.)
or objects other thanlaminating pouches which are
intended for this laminator into the laminating pouch
infeed slot.
