ALDI OL 250-L, Руководство пользователя

Страница: 9 / 31

Safety
9
− Only parts that comply with the original device data may
be used for repairs. Electrical and mechanical parts, which
are essential for providing protection against sources of
danger, are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− Do not immerse the laminator or the power cable or
power plug in water or other liquids.
− Never touch the power plug with damp hands.
− Do not perform any other work (such as cleaning) on the
laminator while it is operating.
− Never pull the power plug out of the socket by the power
cable; instead, always do so by taking hold of the power
plug.
− Never use the power cable as a carrying strap.
− Keep the laminator, power plug and power cable away
from open flames and hot surfaces.
− Lay the power cable so that it does not pose a tripping
hazard.
− Do not kink the power cable and do not lay it over sharp
edges.
− Only use the laminator in indoor areas. Do not use it in wet
rooms or in the rain.
− Never store the laminator so that it is at risk of falling into a
bath tub or washbasin.
− Never reach to retrieve the laminator if it has fallen in
water. In such a case, immediately disconnect the power
plug.
− Make sure that children do not insert any objects into the
laminator.
− Always switch the laminator off and pull the power plug
out of the socket when you are not using the laminator,
cleaning it or in the event of a fault.
− Do not modify the plug in any way. The laminator has
a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician.