ALDI GPMXSZ461, Руководство пользователя

Страница: 8 / 18

AFTER SALES SUPPORT AFTER SALES SUPPORT
+44 (0)1904 727501 +44 (0)1904 727501
+353 (0)1 902 2605 +353 (0)1 902 2605
www.coreservice.co.uk www.coreservice.co.uk
15 16
46CM Petrol Lawnmower 46CM Petrol Lawnmower
GB GB
IRE IRE
GB IRE GB IRE
Assembly Getting Started
handle with the holes in the deck. Make sure the holes in the
lowerhandle are aligned with those in the support.
2b Fix the lower handle onto the deck firmly with fixing knob.
Note!
Make sure the rope guide is on the right handle, when you
stand behind the mower.
Lift the upper handle, and lock in place using the quick release
lever and tensioning bolts that are attached to the handle.
Note!
Make sure the lower and upper handles are firmly
connected. And that the cables are not twisted (Fig 3).
Pull on/off lever and gently pull the rope. Hook it around the
guide rope.
3. Assembling the hybrid collection box (Fig 4 , 5, 6)
Raise the safety flap and hook the hybrid collection box onto the
mower. Release the safety flap.
Note! Always fit the hybrid collection box before starting the
engine.
4. Fix the cable (Fig 7)
Ensure that the cables clips supplied are used to fix the cable to
the lower handle.
Getting Started
PREPARING TO OPERATE THE LAWNMOWER STOP !!!
DO NOT START THE ENGINE BEFORE ADDING OIL TO
THE OIL SUMP. WHEN ADDING, DON‘T EXCEED THE
MAXIMUM LINE.
Note! The following procedures and adjustments must be
performed before the engine is started. Do not attempt to make
any of these adjustments while the engine is running.
Note!
Always use high quality detergent oil classified SAE30 oil
(or equivalent eg 5W 30, often termed as 4 Stroke lawn mower
oil). Never use additives with recommended oil. To prolong the
life of your engine it is important that the oil is changed after
the first 5 hours of use.
Note!
To prevent engine damage the engine is shipped without
oil or petrol. The engine must be filled with the correct grade of
oil and petrol before starting the engine.
Note! Running the engine with a low oil level will cause engine
damage. It is recommend that high detergent, premium quality
4-stroke engine oil used. Using non-detergent oil can shorten
the engine’s service life and using 2-stroke oil will damage the
engine. Check the engine oil level when the engine is stopped
and cool and the mower standing on a level surface.
Remove the oil filler dipstick and wipe any oil from it with a
clean cloth.
Insert the dipstick into the oil filler neck, but do not screw it in.
Then remove the dipstick and check the oil level. The oil level
must be between the Min and Max marks on the dipstick. If near
the lower level, fill to the upper level with the recommended oil