background image

AFTER SALES SUPPORT

AFTER SALES SUPPORT

+44 (0)1904 727501

+44 (0)1904 727501

+353 (0)1 902 2605

+353 (0)1 902 2605

www.coreservice.co.uk

www.coreservice.co.uk

21

22

46CM Petrol Lawnmower

46CM Petrol Lawnmower

GB

GB

IRE

IRE

GB

IRE

GB

IRE

Operation

Cleaning

Note!

 Always empty the hybrid collection box when you have 

finished the mowing, even if it is not full.
Stored grass residues are a fire hazard.
To remove the hybrid collection box, raise the discharge flap with 

one hand and remove the hybrid collection box using its handle 

with your other hand.
Empty the grass debris from the hybrid collection box, and refit it.
If any grass residues are caught in the discharge chute, clean it 

using a brush.
Do not remove grass debris in the mower casing or on the blade 

by hand or with your feet. Instead use suitable tools such as a 

brush or broom.
To ensure that the cut grass can be collected into the hybrid 

collection box, the discharge opening and inside the mower 

casing must be kept clear of any blockage.

Cleaning

Before cleaning, inspecting or repairing your unit, make sure 

that the engine has stopped and is cool. Disconnect the spark 

plug to prevent accidental starting.

Note!

 To ensure the best performance of your lawnmower, it is 

important to keep it clean.
Always clean your lawnmower immediately after use.

Note!

 Do not allow grass cuttings and other debris to become 

dry and hard on any of the mower surfaces. This will directly 

affect the cutting and grass collection performance. Make sure 

that the underside of the lawnmower deck is clean and clear.

Note!

 Never turn the mower upside down.

Note!

 Before you tip the lawn mower onto its side, completely 

empty the fuel tank using a petrol suction pump.

Note!

 Never clean the lawn mower with a water jet or high-

pressure cleaner. The engine must remain dry. Do not use 

aggressive cleaning agents such as cold cleaner or petroleum 

ether.

1. The lawn mower should be thoroughly cleaned after every 

use, especially the underneath and the blade mount. Gently 

tip the mower back with the front wheels up in the air. Dirt and 

grass is easiest to remove immediately after you have finished 

mowing the grass.

2. Check that the grass chute is free of any residual grass. 

Remove any such residue.

Содержание GPMXSZ461



















Отзывы: