AFTER SALES SUPPORT
+44 (0)1904 727501
+353 (0) 19022605
www.coreservice.co.uk
20
1500W Rake and Scarifier
GB
IRE
GB
IRE
Adjusting the height
NOTICE!
Risk of damage to property!
If the scarifier is set incorrectly, the roller or the ground
may be damaged as a result.
−Before each use, check the set depth to avoid any da-
mage to the ground.
−You can adjust the scarifying depth as follows:
Position 0 (+10 mm), 1 (-3 mm), 2 (-6 mm), 3 (-9 mm),
4 (-12 mm).
−If you push the scarifier over hard ground such as stony soil set
the height so that the roller does not come into contact with the
ground.
−If the scarifier is on the ground you intend to treat, lower it so
that the roller is in contact with the ground.
1. If you would like to raise the scarifier, turn the height adjust-
ment
16
to position “0” (see
fig. F).
2. You can now lower the scarifier in increments.
3. For the lowest setting, turn the height adjustment to position
“4”.
Adjusting the handlebar
You can adjust the height of the handlebar to your height.
1. Loosen the adjusting screws
9
slightly.
2. Move the handlebar
1
to a height that is comfortable for you.
3. Tighten the adjusting screws.
The handlebar must be set to the same height on both sides. You
can check this using the marks on the fixtures
8
and the lock
washers
10
.
Operation
