ALDI Ferrex CQB180D-1 Скачать руководство пользователя

Страница: 25 / 29

5. Disconnect the connected pneumatic tools before you clean the compressor.
6. Rub off the compressor with a clean cloth or blow the compressor off with

compressed air at low pressure to remove dust and dirt.

7. Let all parts dry completely.

Replacing the mains connection line

WARNING!

Risk of electric shock!

If the mains connection line is damaged or is improperly

mounted, there is a risk of electric shock.

- The mains connection line may only be replaced by the

manufacturer, its customer service or a similarly qualified

specialist to avoid risks.

- If the mains connection line of this compressor is damaged,

have it replaced by a qualified specialist before using the

compressor again.

Storage

NOTE!

Risk of damage!

The compressor can be damaged as the result of incorrect or

improper storage.

- Pull the mains plug each time before you store the device.

- Only store the compressor and all connected pneumatic tools

in a vented state.

- Always store the compressor in a safe, dry environment.

- Always store the compressor in a room that is not accessible

for children.

- Always store the compressor so that it cannot be operated by

unauthorised persons.

1. Pull the mains plug of the compressor.
2. Let the compressor cool off completely.

Cleaning

Содержание Ferrex CQB180D-1






























Результаты поиска

Содержание Ferrex CQB180D-1

Отзывы:

Похожие инструкции для Ferrex CQB180D-1

Бренды по названию

Популярные бренды

ALDI Ferrex CQB180D-1, Оригинальное руководство пользователя

Результаты поиска

Содержание Ferrex CQB180D-1

Отзывы:

Похожие инструкции для Ferrex CQB180D-1

Бренды по названию

Популярные бренды