ALDI Ferrex CQB180D-1, Оригинальное руководство пользователя

Страница: 19 / 29

- The compressor may only be operated with the rated input
power for 15% of the operating time, that is, for 1.5 minutes.
The compressor will cool off the rest of the time.
- Switch the compressor off after no more than 10 minutes of
continuous operation and let it cool off for at least 10 minutes.
- Do not exceed the permissible power range of compressor. Do
not inflate any lorry, tractor or other large tyres.
NOTE!
Risk of damage!
Operating the compressor with long feed lines, extension cords
or cable drums could cause a voltage drop and prevent the
motor from starting.
- If possible, do not use any long feed lines, extension cords or
cable drums.
- An undersized air pressure system can affect the efficiency of
your device.
NOTE!
Risk of damage!
The compressor will vibrate during operation. If you set up the
compressor in an unsuitable location, you could damage it.
- Place the compressor on an easily accessible, level, dry and
sufficiently stable work surface. Do not place the compressor
on the edge of the work surface.
- During operation, always place the compressor on the
underside.
- Do not place the compressor on or near hot surfaces.
- Set the compressor up in a location with dry and clean air. Do
not use it in wet rooms and in areas where work is performed
with spraying water or in the rain.
Operation
19