ALDI AutoXS FLX-WH-01AUS Скачать руководство пользователя страница 20

Страница: 20 / 28

Troubleshooting

Problem

Possible causes

Solution

Jack doesn’t

lift the

vehicle.

− Not enough oil.

− Reﬁ ll oil (see chapter

“Maintenance, service, and

inspection”).

− Dirty oil is blocking

the release valve.

− Change the oil (see

chapter “Maintenance,

service, and inspection”).

− Release screw

not fully closed.

− Fully close the release

screw.

Jack doesn’t

lower the

vehicle.

− Release screw is not

fully open.

− Fully open the release

screw.

− Too much oil is in the

oil cylinder.

− Let some oil out of the

oil cylinder (see chapter

“Maintenance, service, and

inspection”).

− Dirty oil is blocking

the release valve.

− Change the oil (see

chapter “Maintenance,

service, and inspection”).

Visible

damages.

− Cracked or bent

parts from falling or

other impacts.

− Have the jack inspected

and/or repaired by

qualiﬁ ed personnel.

Jack is leaking

oil.

− The cylinder or seals

may be broken.

− Contact the manufacturer

via the service address on

the warranty card.

The jack

makes noises

when lifting

or lowering a

vehicle.

− Moving parts of the

jack are not fully

lubricated.

− Lubricate the affected

parts with some oil.

− The cylinder is

broken.

− Contact the manufacturer

via the service address on

the warranty card.

Troubleshooting

Maintenance, service, and inspection

Maintenance, service, and inspection

CAUTION! Risk of damage and injury!

A working area contaminated with oil can cause the jack to slip

and result in damage and/or personal injury.
− Thoroughly clean the area where the work will take place

before raising or lowering vehicles in this area.

• Lubricate all moving parts at regular intervals.
• The oil in the oil cylinder

should be changed every

3 years.

− Always check the jack before each use.
− Check for cracks, cracked welds and missing and/or loose

and/or damaged parts. If the jack appears to be damaged or

deformed in any way, do not use the jack.

− If you believe that the jack has been subjected to an abnormal

load or shock, the jack must be inspected immediately by the

manufacturer.

Contact the manufacturer via the service address indicated on

the warranty card.

− If the jack has any problems or missing parts, is damaged,

deformed, or cracked, contact the manufacturer via the service

address indicated on the warranty card.

Содержание AutoXS FLX-WH-01AUS





























Результаты поиска

Содержание AutoXS FLX-WH-01AUS

Отзывы:

Похожие инструкции для AutoXS FLX-WH-01AUS

Бренды по названию

Популярные бренды

ALDI AutoXS FLX-WH-01AUS, Руководство пользователя

Результаты поиска

Содержание AutoXS FLX-WH-01AUS

Отзывы:

Похожие инструкции для AutoXS FLX-WH-01AUS

Бренды по названию

Популярные бренды