ALDI AutoXS FLX-WH-01AUS, Руководство пользователя

Страница: 17 / 28

16
3. Carefully position the saddle
1
of the jack under the vehicle
manufacturer’s recommended lifting point.
4. Pump the lifting lever until the top of the jack’s saddle has
nearly reached the vehicle lifting point.
Lifting a vehicle
Risk of injury!
Never work on, under, or around a vehicle that is supported only
by a jack. The vehicle may not be stable and may suddenly fall,
resulting in personal injury or even death.
− Always use jack stands (not included) immediately after using
the jack to lift a vehicle. Do not rely on the jack to support the
vehicle.
1. Once the jack has been properly placed at the vehicle’s lifting
point, pump the lifting lever
5
using smooth, full strokes.
2. Lift the vehicle a few inches above the desired height.
3. Once the vehicle is raised, slide a jack stand of appropriate
capacity (not included) under the proper lifting point referred
to in the vehicle’s user manual. If using two jack stands,
position them at the same point and height on each side of
the vehicle.
4. Center the vehicle’s lifting point(s) on the saddle of the jack
stand(s). Set the jack stand(s) according to the manufacturer’s
instructions, making sure that they lock securely into position.
5. Slowly turn the release screw
7
counterclockwise using the
bar at the end of the lifting lever to lower the vehicle onto the
saddle(s) of the jack stand(s). Then, turn the release screw
fi rmly clockwise to close it (see Fig. E).
Using the jack