24
Using for the first time
Before using for the first time
Assembling the grass trimmer (Fig. 3a and 3b)
• Fit the safety guard on the motor head (see
Fig. 3a
).
• Then fasten the safety guard with 2 screws (
1.
).
• Finally, secure the edge guide with the last two screws (
2.
) (see
Fig. 3b
).
Fitting the additional handle (Fig. 4)
• Fit the additional handle
3
on the holder on the handle
1
. This
must result in the teeth of the holder and the teeth of the addi-
tional handle engaging in each other.
• Fasten the additional handle with the help of the tightening
screw
13
.
Adjusting the height of the long handle (Fig. 5)
If necessary, adjust the height of the long handle to obtain an opti-
mum working position.
• Place the grass trimmer on the ground so that it stands solidly.
• Undo the safety catch
5
.
• Pull the long handle to the required height.
• Re-tighten the safety catch.
Adjusting the additional handle (Fig. 5)
If necessary, adjust the additional handle
3
of the grass trimmer
to obtain an optimum working position. Always make sure that the
teeth of the additional handle engage with the teeth of the holder
and that the additional handle is securely seated.
• Place the grass trimmer on the ground.
• Undo the tightening screw
13
of the additional handle.
• Set the required position.
• Re-tighten the tightening screw.
Layout_F_ERT_450_1_UK_SPK7.indd 24
Layout_F_ERT_450_1_UK_SPK7.indd 24
25.11.2020 10:58:35
25.11.2020 10:58:35
