
Operation
20
•
Hammer drilling
: Press the button on the side of the changeover switch and
turn the ‘ Drill’ symbol
to the marker. Please note that only a
little pressure needs to be applied when hammer drilling. Applying too much
pressure stresses the motor and could damage it.
− Use the changeover switch (right-hand/left-hand rotation)
3
to select the
desired mode (see
Fig. A
).
•
Right-hand rotation:
Push the switch on the right side as far as it goes into
the product housing. Use right-hand rotation (product rotates clockwise) for
drilling, hammer drilling and tightening screws.
•
Left-hand rotation:
Push the switch on the left side as far as it goes into the
product housing. Use left-hand rotation (product rotates clockwise) to loosen
screws or remove jammed drill bits out of the hole.
Removing a blockage
If the product locks up, proceed as follows:
1. Immediately let go of the On/Off switch
4
as soon as you notice that the product
has locked up.
2. If necessary, pull the drill bit (not included in the package contents) out of the drill-
ing hole.
3. Check whether the blockage is caused by the product by briefly pushing the On/
Off switch. Do not point the drill bit towards yourself or other persons and animals.
• If the product cannot be started, make sure that the switch (right-hand/left-
hand rotation)
3
for the direction of rotation is not in the middle position
and the rechargeable battery (not included in the package contents) is
correctly inserted and sufficiently charged. Now try starting the product again.
If the product does not start, please contact the manufacturer’s after sales
support.
• If the product is running smoothly, go to step 4.
4. Push the On/Off switch all the way down and apply some pressure to the product.
5. Take occasional breaks and, if necessary, take the drill bit out of the drilling hole so
that the drill bit can cool off.
6. Repeat steps 4 to 5 until the blockage has been removed.
Tips and tricks on how to work properly
The information and instructions in this user manual are provided to ensure your
personal safety and the safety of other persons. They are also intended to prevent
damage.
If you follow the tips and tricks provided below, you can complete your work with the
product even more safely and efficiently in a satisfactory manner.
Содержание 802099
Страница 3: ...3 Scope of delivery Dok Rev Nr 198258_20200623 A 6 8 7 2 3 4 1 5 Scope of delivery...
Страница 4: ...4 Scope of delivery B 6 2...
Страница 5: ...5 Scope of delivery C 8...