ALDI 802099, Руководство пользователя, Страница: 19 / 29

Operation
19
NOTICE!
Risk of damage!
Improper handling can damage the product.
− Make sure that the product has stopped moving before pressing the direc-
tion of rotation switch in order to lock the On/Off switch.
− Make sure that the product has stopped moving before changing over the
setting from drilling to hammer drilling and vice versa.
− Use only accessories that are designed for this product and can be securely
clamped into place in the SDS-Plus shank holder or the quick-action drill chuck.
Using the product
The quick-action drill chuck must not be used for hammer drilling into
stone, brick or concrete.
1. Insert the desired drill bit or drill bit adapter and screwdriver bit (not included in
the package contents) (see chapter ‘Operation’).
2. Select the desired mode (see ‘Setting the mode and direction of rotation’ chapter).
3. Select the desired direction of rotation (right-hand/left-hand rotation) (see ‘Set-
ting the mode and direction of rotation’ chapter).
4. If necessary, insert the rechargeable battery (not included in the package contents)
into the product’s rechargeable battery holder 5 .
5. Slowly press the On/Off switch 4 (see
Fig. A
). The product starts slowly.
6. Increase the pressure on the On/Off switch to increase the speed. As soon as the
product is switched on, the LED work light 7 lights up the drilling site.
7. Let go of the On/Off switch to switch the product off.
8. If you stop working or put the product down: Make sure that the product has
stopped moving, and lock the On/Off switch by pushing the switch (right-hand/
left-hand rotation) 3 to the middle position in order to prevent it from acciden-
tally switching on.
9. An operating temperature between 4 °C and 40 °C is recommended.
Setting the mode and direction of rotation
− Use the changeover switch 8 to select the desired mode (see
Fig. C
).
• Drilling/Screwing : Press the button on the side of the changeover switch and
turn the ‘drill’ symbol to the marker.