AFTER SALES SUPPORT
19
1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900
Electrical connection
for waste oil. Add new oil (approx. 80 ml) through the oil filler opening (6) until the
oil level reaches the required level. Re-check the oil level after a short period of
operation.
X. ELECTRICAL CONNECTION
The electrical motor installed is connected and ready for operation. The
connection complies with the applicable Australian standards.
The customer´s mains connection as well as the extension cable used must
also comply with these regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often damaged.
This may have the following causes:
•
Passage points, where connection cables are passed through windows or
doors.
•
Kinks where the connection cable has been improperly fastened or routed.
•
Places where the connection cables have been cut due to being driven over.
•
Insulation damage due to being ripped out of the wall outlet.
•
Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be used and are life-threat-
ening due to the insulation damage. Check the electrical connection cables for
damage regularly. Make sure that the power is switched off before inspecting the
cable. Electrical connection cables must comply with the applicable Australian
standards and must be correctly marked. Only use connection cables with the
marking ''H07RN-F''.Replacement cables can only be fitted by an approved and
certified electrician. If you are in any doubt please contact the help line at the foot
of this page.
AC motor
•
The mains voltage must be 230 - 240 V~.
•
Extension cables up to 25 m long must have a cross-section of 1.5 mm
2
.
•
The mains connection must be protected with a delay action fuse of 16 A.
Connections and repairs of electrical equipment may only be carried out by an
electrician.
Please provide the following information in the event of any enquiries:
•
Type of current for the motor
•
Machine data - type plate
