ALDI 50620 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 36

background image

139cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №.

50620 • 11/2015 • 50620

(toll free)

AFTER SALES SUPPORT

(toll free)

139cc 4 Stroke Petrol Lawn Mower

e-mail: [email protected]

1800 909 909

MODEL: №.

50620 • 11/2015 • 50620

21

EMERGENCY STOPPING

In the event the on/off switch (10) does not stop the engine, the following

processes will assist.
NEVER move the mower, or attempt to move the mower if the controls

DO NOT turn off the motor.
DO NOT attempt to lift or tip the mower on its side.
In the event the OFF switch (10) does not turn off the motor, press the primer

bulb fully 4 or 5 times quickly. The engine should stop.
If this fails to stop the engine, remove the spark plug cap from the spark plug (24).

IMPORTANT:

If the spark plug method is used, it is recommended to wear a

rubber glove when grasping the spark plug cap.
Persons with heart conditions or any medical condition which can be affected

by electric shock should not attempt this method.

NOTE:

If the above methods do not stop the mower, leave the mower to run

until the tank runs out of petrol. DO NOT leave the mower unattended if the

run down method is used.
When the motor has stopped, the fuel should be drained from the fuel tank

(14), spark plug cap (24) removed (if not already removed), and the mower

must NOT be restarted until the problem has been fixed by an Authorised

Service Agent.

Important Primer bulb information.

The priming bulb (22) pump is designed to deliver fuel directly into the

engine for easy start.
Follow these guidelines and you should have trouble free starting.
For first starting at the beginning of the mower session, pump the priming

bulb (22) 2- 3 times. DO NOT EXCEED 3 pumps.
To restart a cold engine i.e after the engine has started and run for just a short

time, you will only need to pump the priming bulb (22) once.

DO NOT EXCEED 2 pumps.
To restart a hot engine, you will not need to pump the priming bulb (22) at all.

NOTE:

If you over pump the engine, it will not start.

DO NOT re-pump the engine priming bulb (22).
Continue to pull the recoil starter (16) and after a number of pulls the engine

will start.

TIGHTEN

Emergency Stopping

«
...
21
22
23
24
25
...
»

Содержание 50620





































Отзывы:

Нет отзывов

Похожие инструкции для 50620

Бренд: Bad Boy Страницы: 44

Бренд: Dixon Страницы: 36

Бренд: Bad Boy Страницы: 32

Rotary Cutters RCR1860

Бренд: Land Pride Страницы: 34

Бренд: Flymo Страницы: 10

Бренд: Parkside Страницы: 160

Бренд: Yard-Man Страницы: 24

Бренд: Montgomery Ward Страницы: 8

Бренд: Tanaka Страницы: 57

eclipse 2 InCommand

Бренд: Jacobsen Страницы: 86

Бренд: Agri-Fab Страницы: 24

COLLECTOR 53 SE COMBI 53 SE COMBI

Бренд: Stiga Страницы: 2

Бренд: Toro Страницы: 24

Бренд: Ariens Страницы: 29

HS-7030 HITCH-N-SWEEP

Бренд: Parker Страницы: 6

Бренд: New Holland Страницы: 52

Бренд: Honda Страницы: 107

Бренд: Murray Страницы: 168

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды