139cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №.
50620 • 11/2015 • 50620
(toll free)
14
AFTER SALES SUPPORT
(toll free)
139cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]
1800 909 909
MODEL: №.
50620 • 11/2015 • 50620
Assembly
WARNING:
Stop the engine and unplug the spark plug before any
repairs or maintenance operations.
WARNING:
DO NOT attempt to start this mower without first adding
0.6L of SAE 10W/30 engine oil to the Engine.
WARNING:
Do Not attempt to start this mower without the mower
first being FULLY assembled.
It is necessary to fit the lower handles (6), upper handle bar and handles (1),
and 45L hard catcher (7) to the mower.
Attaching the Handles
1. To attach the lower handles (6), first remove the two lower handle locking
knobs (8). Place the lower handle in position by aligning the 2 lower
handle ends on the inner side of the lower handle mounting plates (9)
located at the back of the mower deck. (Fig A)
2. Once in position, insert the bolt on each side through the lower handle
(6) and then through the lower handle mounting plate (9).
Orientate the bolt so the head sits correctly in the depression in the
handle tube. (Fig B)
3. Once the bolts are loosely in position, fit the plastic curved washer over
the end of the bolt. Then screw the lower handle bar locking knob (8)
over the plastic curved washer and secure by turning clockwise until tight
and secure. (Fig C)
B.
A.
C.
TIGHTEN
LOOSEN
Assembly
