17
GB
You will also need:
8 cement slabs:
50 × 50 × 4 cm,
approx. 22 kg
each
the assistance of
another person
1. Mount the T-stand (see fig-
ure
A
).
2. Set the T-stand up in the
desired location and insert
the cement slabs (see fig-
ure
B
).
3. Mount the rotary plate
1
on
the T-stand with 4 of the
enclosed washers
2
and
the long screws
3
(see fig-
ure
C
).
4. Screw mount the pole foot
4
on the rotary plate
1
with
another 4 of the enclosed
washers
2
and the short
screws
5
(see figure
C
).
5. Place the sleeve
6
and the
cap
7
on the pole foot.
6. Secure the sleeve
6
with
the knurled screw
8
.
7. Slip the shade pole
9
over
the pole foot and fix it in
place with the knurled
screws
8
(see figure
D
).
The sun shade is now ready
for use.
Opening the shade
(see figure
E
and
F
)
Please note!
– Before opening the sun
shade, ensure that it has
a sufficiently secure posi-
tion, that is, that the prop-
er sun shade base is used.
1. If necessary, remove the
hook and loop strip
16
and
the protective sleeve (see
figure
O
).
2. Gently open the sun shade
by hand. Turn the crank
10
in the process and open
the shade completely.
Tilting the shade
(see figure
G
)
1. Push the locking mecha-
nism
11
in the handle
12
.
2. Slide the handle
12
up or
down.
3. Let the handle
12
lock in-
to the desired position and
let go of the locking mech-
anism
11
.
196967 20201015.indd 17
196967 20201015.indd 17
16.10.2020 09:10:54
16.10.2020 09:10:54