manualshive.com logo in svg

ALDI 10367, Руководство пользователя, Страница: 22 / 32

Поделиться
Скачать
ALDI 10367 Скачать руководство пользователя страница 22

18V Rotary Grinder

AFTER SALES SUPPORT

(toll free)

MODEL No.: DC-180E-1 • 07/2019 10367

e-mail: [email protected]

AUS

20

 1300 889 028

AUS

small spot on the workpiece and check the effect on the workpiece 

before you start working with it.

● 

Make sure that the workpiece is sufficiently secured against slipping,

● 

The stencils serve as guides for tracing your engraving! Never 

attempt to engrave along the stencil directly with the tool. It only 

serves as a drawing template!

● 

Do not press the tool too firmly against the workpiece as this could 

damage the workpiece or the tool.

1)  Secure the workpiece to prevent it from slipping.

2)  Insert a tool. See ASSEMBLY section.

3)  Connect the adapter to the machine, and then connect the plug of 

the adapter to a proper power supply.

4)  Switch on the machine. See SWITCHING ON AND OFF section.

5)  When finished, press the on/off switch (6) to the “I’ position to 

switch off the machine. Wait until the machine has come to a 

standstill before you put it down or remove it from the workpiece.

Содержание 10367

































Отзывы:

Нет отзывов